Enter your keyword

Friggi AST

Vertical Metal Cutting Bandsaw

Friggi Vertical Metal Cutting Bandsaw – AST

Friggi AST Vertical, Metal Cutting Bandsaw

Friggi AST Vertical, Metal Cutting BandsawOne of the main advantages of the Friggi VST vertical bandsaw is the cross-cut head with a wide throat capacity that allows cross-cutting of large plates using a smaller blade than that of a traditional horizontal bandsaw, therefore, reducing blade costs. This can be achieved because the blade is cutting across the smallest cross-section, height, rather than width.

The work table is equipped with heavy rollers that allow for easy movement and positioning of the material as required; saving operator time and costs. The AST is available in semi-automatic or fully automatic with shuttle.

QUICK SPECS

1200×400
Cutting capacity (mm) 400
Throat (mm) 1200
Blade dimension (mm) 6.890x34x1,1
Blade speed ( m/min) 10÷100
Blade motor power ( Kw ) 5,5
Weight ( Kg ) 5.500
1500×600
Cutting capacity (mm) 600
Throat (mm) 1500
Blade dimension (mm) 9.370x54x1,3
Blade speed ( m/min) 10÷100
Blade motor power ( Kw ) 18,5
Weight ( Kg ) 22.300
2000×600
Cutting capacity (mm) 600
Throat (mm) 2000
Blade dimension (mm) 10.600x54x1,3
Blade speed ( m/min) 10÷100
Blade motor power ( Kw ) 18,5
Weight ( Kg ) 23.000
2500×1000
Cutting capacity (mm) 1000
Throat (mm) 2500
Blade dimension (mm) 10.900x67x1,6
Blade speed ( m/min) 10÷100
Blade motor power ( Kw ) 20,5
Weight ( Kg ) 28.000